Category: CS12-80 Preorder Updates

As the title says, setup six on the CS12-80 lowers is now done.  Happened so fast I didn’t even do a “rolling” post with pictures like usual. I did take some pictures for you guys[…]

As the title says, setup five on the CS12-80 Lower Receivers is finished, and I’m prepping tools and programming for setup six. No new pictures, you’ve already seen what setup five looked like. Setup six[…]

Setup number five on the CS12-80 Lower Receivers is now up and rolling. Had the forethought to put all the pin holes into the soft jaws the first time when I made them, so now[…]

Got setup number four on the CS12-80 Lower Receivers done yesterday evening, no scrap was made. Setup number five is incoming, maybe this weekend, but likely first of the coming week. No new pictures, you’ve[…]

Got started on Setup 4 on the CS12-80 Lower Receivers last week and am now rolling on them pretty well.   Should be done with this setup middle of next week.  That will leave setups[…]

Got the replacement lowers all caught up to the rest of the batch, so now all of them can proceed onward to Setup #4.   Doing the programming for it now, so should be running[…]

OK, so the good news is, setup three on the lowers is done . . . for most of the batch. The bad news is that I scrapped enough bars in this setup that I’m[…]

As the title says, setup 3 on the lower receivers is in-progress and moving along nicely.   This is another long one, nearly 50 mins per cycle, so it’s going to take a while to[…]

As the title says, the second setup on the CS12-80 lowers is now done. No pictures, as it was not particularly interesting, just doing the counterbores that are needed for setup 3, but they’re all[…]

Got the first setup for the lower receivers done, now working on the fixture plate for setups two and three. Here’s a pic of the last few bars coming out of setup 1:    […]